ORNAMENTAL TURNING REFERENCES
                    IN MODEL ENGINEER MAGAZINE
              Compiled by John Foulkes for SOT Bulletin 94

 Vol  Page       Short Description and further pages
  12   67  Ornamental Examples by Pittler lathe
  12  350  Notes on Ornamental 'Turning
  13  484  Chuck for Ornamental Work in the Lathe
  14  610  Chuck for Oval Turning
  17  499  Elementary Ornamental Turning by T. Goldsworthy Crump + pp. S63, 620
  18    9  Elementary Ornamental 'Turning by T. Goldsworthy Crump + pp.133, 325, 579
  19  207  Elementary Ornamental 'Turning by T. Goldsworthy Crump
  19  498  Letter re Ornamental Turning from J. Fell
  21   25  Ornamental Turning by I. Parkinson; Elementary by T Goldsworthy Crump pp 81, 158
  22  569  Elementary Ornamental Turning by T. Goldsworhty Crump
  26  539  Making an Oval Chuck for Ornamental Work by W. G. Giuliano
  33  103  Ornamental Drilling Spindle, Eccentric and Universal cutters, by Fancy Norton
  34  299  Description of a Holtzappfel lathe by George Gentry
  34  349  Eccentric Turning by C.H. Murray (double ended chucks)
  35    5  A Simple (~I Chuck by C. H. Murray
  35   71  Ornamental Turning on a screwcutting lathe by C. H. Murray
  35  357  A Compound Eccentric and Oval Chuck (major constructional article) by C. H. Murray.
  36  212  A Method of dividing an Ellipse (Oval) by C.H. Murray
  43  131  A Universal Cutter Frame, Hot, type with drawings + p152 for methods of making
  44  375  Universal Cutter Frame with ball joint adjustment to the drive + p 434
  47  170  An Old Medallion and Rose Engine Lathe by George Gentry + p567
  48   35  Henry B. Massey's Ornamental Lathes by F Westmorland
  48  319  An S' centre lathe and its attachments, anon, stated to have belonged to Hartley
  48  339  Ornamental Lathes and Old times mainly about Massey, by J.T.A.
  49   91  Inlaying with the Lathe by G.A. Grace + p 123
  53   39  A Drill Spindle and some Ornamental Lathe Work by Percy Norton
  53  259  Worshipful Company of Turners Exhibition, 1925
  59  290  An Old Double IEccentric Chuck for O~ and other work by C. H. Chaplin
  102 412  Letters and pictures re. G'yen Lathes + pp 610 & 807
  103 697  Front cover picture of Geometric chuck and Smoke Rings description
  107 334  Ornamental Turning Revival review of SOT Bulletin - Ivory Chessmen
  109 396  Ornamental Turning on a screwcutting lathe
  112  30  Elliptical Chuck and oval Turning
  112 104  Making an Ivory Tower